-
Details
The Strips control IC WS2811 inserted in SMDRGB LED diode, supporting numerous color-change effects .
It comes in 5 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires .
Customized length is workable .Flexible PCB material . Each LED/Pixel can be cut , there is cut lines every 16.6mm.60LEDs/M .
5V low voltage inputted , don?t over 6V , otherwise you will destroy the entire strip .
10mm width PCB , 0.25mm thickness with 3M tape back side for non-weatherproof version . 12mm width , 4mm thick with silicon tube for waterproof type .
Controller System:SD controller , DMX controller,Artnet and so on .
What makes it special ? It's signal continues when a pixel failed.
Just likes the photo, the green one is working fine, the red one is failure LEDs, but it conitunes work when the red LEDs happen.
TECHNICAL DETAILS:
Part # KT-DT60-2813 LED Quantity 60LEDs/M IC Driver WS2813 IC Quantity 60IC/M Voltage DC5V Power 14.4W/M PCB Width 10MM Pixel number 60Pixels/M
5V WS2813 Digital RGB LED Strip 60LEDs/M 60Pixels/M
The Strips control IC WS2811 inserted in SMDRGB LED diode, supporting numerous color-change effects .It comes in 5 meters per reel with 4Pin female/male JST SM connector on both end and separated Powe
- Model:： KT-DT60-2813
- Voltage： 5V DC